NIS manufactures and blends a variety of lubricants to allow max performance and reduced wear in different mechanical applications. The specific engineered NanoLub® IF-WS₂ products are based on a patented platform technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooth them, thereby reducing friction and wear, improving overall mechanical efficiency while extending machinery life.

Bearings

Bearings are an integral part of all machinery. The use of highly effective lubricants in Bearings is vital for their efficiency, as reducing Wear and Friction prevents overheating and premature failure of the bearing while allowing for continued and efficient operation under much higher temperatures, speeds and loads.

NanoLub® Bearing Oil Additives and Greases are surface-reconditioning nano lubricants based on a unique patented technology of proprietary super strong tungsten disulfide WS₂ multilayered nano fullerene-like particles. These unique multi-layer IF-WS₂ nano-spheres lower friction and reduce mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooth them, thereby improving mechanical efficiency and bearing life.

The Result:

Reduction of Wear on balls and races
Extended Service Life of the Bearing
Increase in Dynamic Load

Fleet Management

Staying on the road longer.

When it comes to fleet maintenance and fuel management Nanotech’s complete line of products has you covered. From our NEW Fully Formulated Grease line, engine oil additives and Fully Formulated Gear Oils, we can help keep you on the road longer while minimizing vehicle maintenance and considerably increasing your efficiency.

The difference is Nano.

Not only does our super strong and lubricious tungsten disulfide WS₂ multilayered nano-fullerene-like particles (IF-WS₂ ) nano-spheres lower friction, heat and reduce mechanical wear, it also releases it’s tribofilms (layers) on surfaces to smooth and repair them which will extend the mechanical efficiency of the apparatus.

To put it simply, Nanotech products are engineered stronger from the particle up.

Cost efficient. You’ll have the proof.

If your vehicles could be running more profitable, wouldn’t you want to know? When you combine our products with your existing fleet management software you will have all the data needed to know your team is riding responsibly.

Defined Result

Optimized Engine and Gear Performance
Extended Vehicle Life
Fewer Service Requirements
Decreased Fuel Consumption
Reduced Operation Costs

Trucks and Buses

Millions of trucks and buses worldwide carry heavy loads and passengers through dense city traffic and cross country excursions every day. The engines and drive train in trucks and buses are especially exposed to wear and tear. This is due to constant operation, accumulated mileage and stop and go traffic. The result is lower vehicle performance over time, frequent breakdowns with costly service requirements and lower fuel efficiency.

NanoLub® Engine Oil Additives and Fully Formulated Gear oils are surface-reconditioning nano lubricants, based on a unique patented technology of proprietary super strong and lubricious tungsten disulfide WS₂ multilayered nano-fullerene-like particles. These unique multi-layer IF-WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure and shear cause these nano-spheres to release tribofilms that attach to surface asperities and smooth them, thereby extending mechanical efficiency and apparatus life.

The Result:

Optimized Engine and Gear Performance
Extended Vehicle Life
Fewer Service Requirements
Decreased Fuel Consumption
Reduced Operation Costs

Conveyor Systems

Conveyor systems are imperative to many manufacturing processes. A poorly operating inefficient conveyor, especially one plagued with frequent breakdowns and short between service intervals, may have a drastic impact on manufacturing quality, efficiency, and cost. That’s why proper maintenance is imperative to ensure that conveyor systems perform at peak capacity. Trolley wheels and bearings require lubrication in order to reduce friction. The chain pull that the drive experiences can double if the bearings are poorly lubricated. This can cause the system to overload by either its mechanical or electrical overload protection.

NanoLub® Anti-Wear Anti Friction nano lubricants are based on a unique patented technology of proprietary super strong tungsten disulfide WS₂ multilayered nano fullerene-like particles. These unique multi-layer IF-WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooth them, thereby extending mechanical efficiency and apparatus life.

The Result:

Extended Application Life
OptimizedPerformance
Lower Service Requirements
Reduced Energy Consumption
Improved Operation Costs

Gears and Gear Boxes

Gears and Gear Box systems work under constant strain, extreme pressure and are particularly vulnerable to wear. This results in declining performance, increase in maintenance cost and eventual machinery breakdown.

NanoLub® Fully Formulated Gear Oils are anti-wear anti friction nano lubrication solutions that are based on a unique patented technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique multi-layer IF-WS₂ nano-spheres lower friction and, thereby reducing mechanical wear. At the same time, contact pressure and shear cause nano-spheres to release tribofilms that attach to surface asperities and smooth them, thereby extending mechanical efficiency and life of equipment.

The Result:

Extended Gear Life
Lower Service Requirements
Reduce Energy Consumption
Improve Power & Torque Performance

Heavy Machinery

Heavy Machinery is specially designed for mechanically abusive construction tasks and heavy earthwork operations. The extreme loads and almost nonstop operation, results in increased wear and tear of vital machinery elements, such as engine, transmission and other moving parts. Over time, this results in significantly lower vehicle performance, breakdowns, costly service requirements and lower fuel efficiency.

NanoLub® Heavy Duty Anti-Wear & Anti Friction lubricants are based on a unique patented technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique multi-layer IF-WS₂ nano-spheres lower friction and reduce mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooth them, thereby extending mechanical efficiency and apparatus life.

The Result:

Significant Reduction in Wear and Friction
Extended Application Life
OptimizedPerformance
Lower Service Requirements
Reduced Energy Consumption
Improved Operation Costs

Mining

Various machinery applications are used in the mining industry to bore through rock, break up and remove these rocks, as well as many other very difficult tasks. Most of these machines work under extremely harsh conditions, resulting in significant equipment wear, which in turn causes a reduction in efficiency, breakdowns and higher maintenance costs over time.

NanoLub® Anti-Wear & Anti Friction lubricants are based on a unique patented technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique multi-layer WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooth them, thereby extending mechanical efficiency and apparatus life. Nanolub® product range includes Extreme Pressure Oil and Grease AW/AF additives as well as AW/AF Dry Coating, capable of significantly improving the performance of Extreme Pressure applications used in Mining Equipment.

The Result:

Significant Reduction in Wear and Friction
Extended Application Life
OptimizedPerformance
Fewer Service Requirements
Reduced Energy Consumption
Improved Operation Costs

Oil and Gas Drilling

The heavy specialized machinery employed by the Oil & Gas Drilling and Exploration Industries, for both onshore and offshore projects, work under extreme pressure conditions, enduring high loads and temperatures. Inevitably, continuous friction causes wear of essential mechanical parts, leading to decline in machine performance and reliability, delay in operations, shorter service cycles and higher maintenance requirements. This is especially critical for an industry operating under high operational costs.

NanoLub® Anti-Wear & Anti Friction lubricants are based on a unique patented technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique multi-layer WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooth them, thereby extending mechanical efficiency and apparatus life. Nanolub® product range includes Extreme Pressure Oil and Grease AW/AF additives as well as AW/AF Dry Coating, capable of significantly improving the performance of Extreme Pressure applications used in the Oil & Gas drilling industries.

The Result:

Significant Reduction in Wear and Friction
OptimizedPerformance
Extended Application Life
Fewer Breakdowns
Fewer Service Requirements
Reduced Energy Consumption
Improved Operation Costss

Metal Forming

Metal Forming equipment operate under conditions of Extreme Pressure and Friction, causing a significant amount of wear to accumulate over time. This often results in noticeable decline in machine efficiency, excessive energy consumption and frequent breakdowns. Another issue is the inability to use wet lubrication in complicated manufacturing processes.

NanoLub® Anti Wear & Anti Friction lubricants are based on a unique patented technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique multi-layer WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooth them, thereby extending mechanical efficiency and apparatus life. Nanolub® product range includes Extreme Pressure Oil and Grease AW/AF additives as well as AW/AF Dry Coating, capable of significantly improving the performance of Extreme Pressure applications used in the Metal Working industry.

The Result:

Significant Reduction in Wear and Friction
Extended Application Life
OptimizedPerformance
Fewer Service Requirements
Reduced Energy Consumption
Improved Operation Costs

Steel Mills

Machinery equipment utilized in the Steel Industry operates under harsh conditions of heavy loads and high temperatures. This, in addition to almost nonstop operation and constant friction, results in significant wear and tear in mechanical parts.

NanoLub® Anti-Wear & Anti Friction lubricants are based on a unique patented technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique multi-layer WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooth them, thereby extending mechanical efficiency and apparatus life. Nanolub® product range includes Extreme Pressure Oil and Grease AW/AF additives of various types, as well as AW/AF Dry Coating, capable of significantly improving the performance of Extreme Pressure applications used in the Steel Industry.

The Result:

Significant Reduction in Wear and Friction
OptimizedPerformance
Extended Application Life
Fewer Breakdowns
Fewer Service Requirements
Improved Energy Efficiency
Improved Operation Costs

Power Generation Plants

Mechanical equipment used in the power generation industry includes Diesel Generators, Turbines, Gears, Chains, Wire Ropes and other mechanical equipment. All of these are required to operate, almost nonstop, under Extreme Pressure conditions. Their mechanical parts are subjected to constant friction resulting in wear, loss of operational efficiency, short maintenance intervals and eventual breakdowns.

NanoLub® Effective Anti-Wear & Anti Friction lubricants are based on a unique patented technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique multi-layer WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooth them, thereby extending mechanical efficiency and apparatus life. Nanolub® product range includes Extreme Pressure Oil and Grease AW/AF additives of various types, as well as AW/AF Dry Coating, capable of significantly improving the performance of Extreme Pressure applications used in the Power Generation Industry.

The Result:

Significant Reduction in Wear and Friction
Optimized Performance
Extended Application Life
Fewer Breakdowns
Fewer Service Requirements
Improved Energy Efficiency
Improved Operation Costs
Increased Generated Power Output

Railroad

The use of high quality lubricants in railway systems is essential for maintenance, reliability and safety. Hundreds of different mechanical applications are utilized in this complex industry, many of them are subjected to constant wear and friction, while operating under harsh conditions of extreme pressure, high loads and temperatures, leading to equipment wear, loss of efficiency, breakdowns and short maintenance cycles.

NanoLub® Anti-Wwear & Anti Friction lubricants are based on a unique patented technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique multi-layer WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooth them, thereby extending mechanical efficiency and apparatus life. Nanolub® product range includes Extreme Pressure Oil and Grease AW/AF additives of various types, as well as AW/AF Dry Coating, capable of significantly improving the performance of different mechanical systems used in railway systems.

The Result:

Significant Reduction in Wear and Friction
OptimizedPerformance
Extended Application Life
Fewer Breakdowns
Fewer Service Requirements
Improved Energy Efficiency
Improved Operation Costs

Moving Freight

Freight is moved from city to city, coast to coast, or across the oceans. Trucks, boats and planes of all sizes and types work round the clock getting the job done. Different mechanical applications, essential for their proper operation keep these machines moving. Some of these include: engine and gear systems, conveyors, chains, cranes, compressors and other mechanical parts. Most of these operate under harsh, extreme pressure conditions, with constant friction and wear causing loss of efficiency, short maintenance cycles and equipment breakdowns.

NanoLub® Anti-Wear & Anti Friction lubricants are based on a unique patented technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique multi-layer WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooth them, thereby extending mechanical efficiency and apparatus life. Nanolub® product range includes Extreme Pressure Oil and Grease AW/AF additives of various types, as well as AW/AF Dry Coating, capable of significantly improving the performance of different mechanical systems used in freight movement.

The Result:

Significant Reduction in Wear and Friction
Optimized Performance
Extended Application Life
Fewer Breakdowns
Fewer Service Requirements
Improved Energy Efficiency

Space and Defense

NIS’s proprietary technology has great potential for different applications in the Space and Defense sector, as already recognized by leading industry players and customers.

Our proprietary multi-layered, spherical and tubular shapes of tungsten disulfide (WS₂) have notably high pressure, impact and heat resistances. They have low toxicity and high metal bonding capacity. These properties, in appropriate formulations, can facilitate the creation of “super performing” lubricants, coatings, and polymer composites. These breakthrough inorganic, multi-layered nano-structures are also particularly promising for applications in thin surface-coatings for friction and wear protection.

In addition, NIS’s inorganic fullerenes-like particles and nanotubes can be applied for reinforcing bulk polymers and adhesives (thermoplastics and thermosets) for various applications. Such nanoparticles will enhance the matrix’s impact absorption, strength and elasticity, as well as its resistance to friction and wear. Our inorganic fullerene-like particles and nanotubes can also be incorporated with non-polymeric media, thus forming metal and ceramic matrix composites.

Wind Turbines

Wind turbines are subjected to constant friction and wear while operating under extreme pressure conditions of heavy loads and varying temperatures. This causes significant maintenance problems with declining productivity, worsened performance, frequent breakdowns and shortened machinery life.

NanoLub® Anti-Wear & Anti Friction lubricants are based on a unique patented technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique multi-layer WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooth them, thereby extending mechanical efficiency and apparatus life. Nanolub® product range includes Extreme Pressure Oil and Grease AW/AF additives of various types, as well as AW/AF Dry Coating, capable of significantly improving the performance of Extreme Pressure like turbines and other mechanical systems used in Wind Turbines.

The Result:

Significant Reduction in Wear and Friction
OptimizedPerformance
Extended Application Life
Fewer Breakdowns
Fewer Service Requirements
Improved Energy Efficiency
Improved Operation Costs