High performing Anti-Wear, Anti-Friction and Extreme Pressure water based additive. Use for metalworking and non flammable water soluble lubricants with superior cooling properties

Applications

• Superior Extreme Pressure protection. Very low wear even under high load
• Improves heat transfer properties of water by 20%
• Can be added to all types of water dilutable metalworking fluids – soluble oils, semi synthetics, and synthetics.
• Safe, dose not contain chlorinated paraffins
• Reduce coefficient of friction
• Can be used from low to high temperature
• Will not smoke
• Superior surface finishing
• Typical treat rate of 0.25%-4%. depending on the operation

Format and Packaging

• 26 Kg/57.20Lb
• 290 Kg/638 Lb
• 1,400 Kg/3,080 Lb

Technical Specs

Color: Black
Treat Rate: 0.5% – 4% by weight
Health: Non-toxic close cage particles as per OECD protocols
Safety: REACH Compliant

Industries

Metalworking fluids
Synthetic and Semi-synthetic (emulsions)
Water based lubricants and coolants
Surface protecting soft coating (when sprayed, dipped and dried)

Benefits

• Superior Extreme Pressure protection. Low wear even under high load
• Tool life increase up to 5 times
• Improves heat transfer properties of water up to 20%
• Can be added to all types of water dilutable metalworking fluids – soluble oils, semi synthetics, and synthetics.
• Dose not contain chlorinated paraffins
• Reduction in coefficient of friction
• Superior surface finishing

How to Use

• Add to distilled water or water based product (PAG) at 0.25% – 5% by weight.
• May require stabilization. Depends on final formulation and other components/ additives that are in the formulation
• Mixing time: minimum of one hour
• Can be used in liquid form for MWF or lubrication application
• Can be used in dry application: dipped or sprayed on a surface to be protected and dried at room temperature. The solid containing layer will give excellent lubricity and protective properties.
• Avoid using sodium o-phenylphenate base biocides with corrosion inhibitor Sebacic acid in same formulation with Nanolub® IW-4000. It may cause instability of particles.

Sidebar