• Excellent performance at very low treat rate (1 – 4%)
• Superior Extreme Pressure (EP), Anti-Friction (AF) and Anti-Wear (AW) properties
• For grease formulations for industrial, mining & heavy equipment, bearings, gears
(Open & closed gears) slide ways and various other applications
• Excellent synergy with graphite and MoS₂
Color: Dark Gray
Treat Rate: 1%-4% by weight
Density: 1.44 – 1.56 g/cm3
Health: Non-toxic closed caged particles as per OECD protocols
Format: Paste form
Containers:
Bearings are an integral part of all machinery. The use of highly effective lubricants in bearings are vital for their efficiency, as reducing wear and friction prevents overheating and premature failure of the bearing while allowing for continued and efficient operation under much higher temperatures, speeds and loads.
NIS manufactures and blends a variety of lubricants to allow max performance and reduced wear in different mechanical applications. The specific engineered IF-WS₂ products are based on a patented platform technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooths them, thereby reducing friction and wear, improving overall mechanical efficiency while extending machinery life and optimizing performance.
A poorly operating, inefficient conveyor, especially one plagued with frequent breakdowns and short between service intervals, may have a drastic impact on manufacturing quality, efficiency, and cost. That’s why proper maintenance is imperative to ensure that conveyor systems perform at peak capacity. Trolley wheels and bearings require lubrication to reduce friction. The chain pulls that the drive experiences can double if the bearings are poorly lubricated. This can cause the system to overload by either its mechanical or electrical overload protection.
NIS manufactures and blends a variety of lubricants to allow max performance and reduced wear in different mechanical applications. The specific engineered IF-WS₂ products are based on a patented platform technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooths them, thereby reducing friction and wear, improving overall mechanical efficiency while extending machinery life and optimizing performance.
Gears and Gear Box systems work under constant strain, extreme pressure, and are particularly vulnerable to wear. This results in declining performance, increase in maintenance cost, and eventual machinery breakdown.
NIS manufactures and blends a variety of lubricants to allow max performance and reduced wear in different mechanical applications. The specific engineered IF-WS₂ products are based on a patented platform technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooths them, thereby reducing friction and wear, improving overall mechanical efficiency while extending machinery life and optimizing performance.
Heavy Machinery is specially designed for mechanically abusive construction tasks and heavy earthwork operations. The extreme loads and almost nonstop operation results in increased wear and tear of vital machinery elements- such as the engine, transmission, and other moving parts. Over time, this results in significantly lower vehicle performance, breakdowns, costly service requirements and lower fuel efficiency.
NIS manufactures and blends a variety of lubricants to allow max performance and reduced wear in different mechanical applications. The specific engineered IF-WS₂ products are based on a patented platform technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooths them, thereby reducing friction and wear, improving overall mechanical efficiency while extending machinery life and optimizing performance.
Various machinery applications are used in the mining industry to bore through and remove rocks, as well as many other tough tasks. Most of these machines work under extremely harsh conditions, resulting in significant equipment wear. Which in turn, causes a reduction in efficiency, breakdowns, and higher maintenance costs over time.
NIS manufactures and blends a variety of lubricants to allow max performance and reduced wear in different mechanical applications. The specific engineered IF-WS₂ products are based on a patented platform technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooths them, thereby reducing friction and wear, improving overall mechanical efficiency while extending machinery life and optimizing performance.
The heavy specialized machinery employed by the Oil & Gas Drilling and Exploration Industries, for both onshore and offshore projects, work under extreme pressure conditions, enduring high loads and temperatures. Inevitably, continuous friction causes wear of essential mechanical parts, leading to a decline in machine performance and reliability, delay in operations, shorter service cycles and higher maintenance requirements. This is especially critical for an industry operating under high operational costs.
NIS manufactures and blends a variety of lubricants to allow max performance and reduced wear in different mechanical applications. The specific engineered IF-WS₂ products are based on a patented platform technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooths them, thereby reducing friction and wear, improving overall mechanical efficiency while extending machinery life and optimizing performance.
Metal Forming equipment operates under conditions of extreme pressure and friction, causing a significant amount of wear. This often results in a noticeable decline in machine efficiency, excessive energy consumption, and frequent breakdowns. Another issue is the inability to use wet lubrication in complicated manufacturing processes.
NIS manufactures and blends a variety of lubricants to allow max performance and reduced wear in different mechanical applications. The specific engineered IF-WS₂ products are based on a patented platform technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooths them, thereby reducing friction and wear, improving overall mechanical efficiency while extending machinery life and optimizing performance.
Machinery equipment utilized in the Steel Industry operates under harsh conditions of heavy loads and high temperatures. This, in addition to almost nonstop operation and constant friction, results in significant wear and tear in mechanical parts.
NIS manufactures and blends a variety of lubricants to allow max performance and reduced wear in different mechanical applications. The specific engineered IF-WS₂ products are based on a patented platform technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooths them, thereby reducing friction and wear, improving overall mechanical efficiency while extending machinery life and optimizing performance.
Mechanical equipment used in the power generation industry includes diesel generators, turbines, gears, chains, wire ropes, and other mechanical equipment. All of these are required to operate, almost nonstop, under extreme pressure conditions. Their mechanical parts are subjected to constant friction resulting in wear, loss of operational efficiency, short maintenance intervals, and eventual breakdowns.
NIS manufactures and blends a variety of lubricants to allow max performance and reduced wear in different mechanical applications. The specific engineered IF-WS₂ products are based on a patented platform technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooths them, thereby reducing friction and wear, improving overall mechanical efficiency while extending machinery life and optimizing performance.
The use of high-quality lubricants in railway systems is essential for maintenance, reliability, and safety. Hundreds of different mechanical applications are utilized in this complex industry. Many of them are subjected to constant wear and friction while operating under harsh conditions of extreme pressure, high loads, and temperatures. This leads to equipment wear, loss of efficiency, breakdowns, and short maintenance cycles.
NIS manufactures and blends a variety of lubricants to allow max performance and reduced wear in different mechanical applications. The specific engineered IF-WS₂ products are based on a patented platform technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooths them, thereby reducing friction and wear, improving overall mechanical efficiency while extending machinery life and optimizing performance.
When it comes to fleet maintenance and fuel management, Nanotech’s complete line of products has you covered. From our New Fully Formulated Grease line, engine oil additives and Fully Formulated Gear Oils, we can help keep you on the road longer while minimizing vehicle maintenance and considerably increasing your trucks’, buses’, planes’, and ships’ efficiency.
NIS manufactures and blends a variety of lubricants to allow max performance and reduced wear in different mechanical applications. The specific engineered IF-WS₂ products are based on a patented platform technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooths them, thereby reducing friction and wear, improving overall mechanical efficiency while extending machinery life and optimizing performance.
Our proprietary multi-layered, spherical, and tubular shapes of tungsten disulfide (WS₂) have notably high pressure, impact, and heat resistance. They have low toxicity and high metal bonding capacity. These properties, in appropriate formulations, can facilitate the creation of “super performing” lubricants, coatings, and polymer composites. These breakthrough inorganic, multi-layered nano-structures are also particularly promising for applications in thin surface-coatings for friction and wear protection.
In addition, NIS’ inorganic fullerene-like particles and nanotubes can be applied for reinforcing bulk polymers and adhesives (thermoplastics and thermosets) for various applications. Such nanoparticles will enhance the matrix’s impact absorption, strength, and elasticity, as well as its resistance to friction and wear. Our inorganic fullerene-like particles and nanotubes can also be incorporated with non-polymeric media, thus forming metal and ceramic matrix composites.
NIS manufactures and blends a variety of lubricants to allow max performance and reduced wear in different mechanical applications. The specific engineered IF-WS₂ products are based on a patented platform technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooths them, thereby reducing friction and wear, improving overall mechanical efficiency while extending machinery life and optimizing performance.
Wind turbines are subjected to constant friction and wear while operating under extreme pressure, conditions of heavy loads and varying temperatures. This causes significant maintenance problems with declining productivity, worsened performance, frequent breakdowns and shortened machinery life. IF-WS2 product range includes Extreme Pressure Oil and Grease AW/AF additives of various types, as well as AW/AF Dry Coating, capable of significantly improving the performance of extreme pressure like turbines and other mechanical systems used in wind turbines. The use of a cutting-edge lubricant will increase the overall reliability of the wind turbine system.
NIS manufactures and blends a variety of lubricants to allow max performance and reduced wear in different mechanical applications. The specific engineered IF-WS₂ products are based on a patented platform technology of proprietary super strong tungsten disulfide (WS₂) multilayered nano fullerene-like particles. These unique WS₂ nano-spheres lower friction and heat, thereby reducing mechanical wear. At the same time, contact pressure causes nano-spheres to release tribofilms that attach to surface asperities and smooths them, thereby reducing friction and wear, improving overall mechanical efficiency while extending machinery life and optimizing performance.
Need more info? We are happy to help!